Product Description
Product introduction:Steel Plate
Steel Plate or structural steel is simply steel sheet material that can be customarily cut and welded to develop a more elaborate product. Steel plate is made by compressing multiple steel layers together into one; forming a plate of steel.
Steel Plate is commonly used to strengthen foundations and uphold mass units of weight like bridges. Alternatively, it provides a base for the construction of larger materials and non-workable parts.
Applications for Steel Plate are based acutely on the specifics of the project. This simply means that certain grades are more appropriate to particular tasks than others.
Product display:
Availability & Standards of steel plates:| Type/Material | Main grade | Thickness |
| Carbon steel plate | The carbon steel plate has usually been considered as steel that does not contain any alloy steel elements. Generally, elements are C, Mn, P, S, Si, besides these, there are no minimum limits for elements of Al, Cr, Ni, Mo, V, etc. Carbon steel plates are available in different grades depending on carbon content and strength. Q235A/B/C/D Q275A/B/C/D A283Gr.C/Gr.D ASTMA36 A573Gr.58/Gr.65/Gr.70 SS400 SM400A/B/C S235JR/J0/J2 S275JR/J0/J2 S275N/NL S275M/ML, 250, 250L0, 250L15 | 5-130mm |
| Low alloy steel plate | Low alloy steel plate contains fewer alloy elements below 3.5% of total elements. Intending to add some alloy elements on the carbon steel basic for improving the steel performance. Low alloy steel plates are mainly used to manufacture plants and factories. Q345A/B/C/D/E Q390A/B/C/D/E Q420A/B/C/D/E Q460C/D/E Q500C/D/E Q550C/D/E Q620C/D/E Q690C/D/E Q890D/E Q960D/E XGCFQ500D/E A572Gr.50/Gr.60 SS490 SM490A/B/C S355JR/J0/J2/K2 S355J2G3 S355N/NL S420N/NL S460N/NL S355M/ML S420M/ML S460M/ML S500Q/QL/QL1 S550Q/QL/QL1 S620Q/QL/QL1 S690Q/QL/QL1 S355G8+N,350 350L0 350L15 | Grade 345:5-130mm Grade 390-690:6-80mm Grade 890-960:6-50mm |
| General strength ship plate High-strength ship board Ultra-high-strength ship board | A/B/D/E, A32/D32/E32/F32, A36/D36/E36/F36, A40/D40/E40/F40, A131A/B/D/E/AH32/DH32/EH32/AH36/DH36/EH36/AH40/DH40/EH40 NVA420/D420/E420, NVA460/D460/E460, NVA500/D500/E500, NVA550/D550/E550 | General strength and high strength: 5-80mm Ultra-high strength: 5-115mm (certification stage) |
| Marine pot capacity board | NV360/410/460/490/510 , LR360/360FG, LR410/410FG, LR460FG/490FG/510FG | 5-60mm |
| Bridge plates | Q235qC/D/E , Q345qC/D/E, Q370qC/D/E, Q420qC/D/E , Q460qC/D/E , Q500qD/E , Q550qD/E , Q620qD/E , Q690qD/E , A709-50T-1/50T-2/50T-3/50F-1/50F-2/50F-3, A 709-50W-A/B/C-F1/F2/F3 -T1/T2/T3 | Grade 235-420:5-100mm Grade 460-690:6-80mm |
| Boiler vessel plate | Q245R, Q345R, Q370R, 15CrMoR, 12Cr1MoVR, 13MnNiMoR, 12Cr2Mo1R, 14Cr1MoR, 18MnMoNbR, 16MnDR, 09MnNiDR, 15MnNiDR, 07MnCrMoVR, 07MnNiMoVDR, 12MnNiVR, XG610E, 12MnNiVR-SR, Q245R(HIC), Q345R(HIC), Q245R(R-HIC), Q345R(R-HIC) , XGCF62, 16MnDR (HIC) , 16MnDR (R-HIC) P235GH, P265GH, P295GH, P355GH, 16Mo3, P275NH/NL1/NL2, P355N/NH/NL1/NL2, P460NH/NL1/NL2, P355M/ML1/ML2, P420M/ML1/ML2, P460M/ML1/ML2, P355Q/QH/QL1/QL2, P460Q/QH/QL1/QL2, P500Q/QH/QL1/QL2, P690Q/QH/QL1/QL2, 10CrMo9-10, 11MnNi5-3, 13CrMo4-5, 13CrMoSi5-5, 13MnNi6-3, 18MnMo4-5, 20MnMoNi4-5, (S)A204Gr.A/Gr.B/Gr.C, (S)A285Gr.A/Gr.B/Gr.C, (S)A299Gr.A/Gr.B, A302Gr.A/Gr.B/Gr.C/Gr.D, 387Gr.2/Gr.11/Gr.12/Gr.22, ASTMA455, (S)A515Gr.60/65/70, (S)A516Gr.55/60/65/70 , (S)A516Gr.60(HIC), (S)A516Gr.60(R-HIC), (S)A517Gr.B/Gr.H, (S)A533Gr.A/Gr.B/Gr.C, (S)A537Cl.1/Cl.2/Cl.3, ASTMA612, (S)A662Gr.A/Gr.B/Gr.C, (S)A737Gr.B/Gr.C, A738Gr.A/Gr.B/Gr.C, (S)A841Gr.A/Gr.B/Gr.C/Gr.D, SB410/450/480, SB450M/480M, SEV245/295/345, SBV1A/1B, SBV2/3, SGV410/450/480, SPV235/315/355/410, SPV450/490, SQV1A/1B/2A/2B/3A/3B | Grade 235-420:5-100mm Grade 460-690:6-80mm |
| High rise building plate | Q235GJB/C/D/E , Q345GJB/C/D/E, Q390GJC/D/E, Q420GJC/D/E, SN400A/B/C, SN490B/C | 5-100mm |
| Pipeline Steel Plate | Pipeline steel plates are used to fabricate large diameter welded pipes which transportation oil and natural gas, also known as pipe steel plates. Now more and more world's people focus on protecting our environment, new clean energy natural gas is widely used through pipelines. These pipeline steel plates own ability to resist high pressure, atmospheric corrosion and lower temperature surroundings. API 5L---A25/A/BR/BM/X42R/X42M/X46M/X52M/X56M/X60M/X65M/X70M/X80M GB/T 21237--- L245/L290/L320/L360/L390/L415/L450/L485/L555 GB/T 14164--- S245/S290/S320/S360/S390/S415/S450/S485/S555 | 5-40mm |
| Weather-resistant steel plate | Weather Resistant Steel Plates are used in applications that last longer and are exposed to the atmosphere for the long term. Applications that have to have plates in the open often use these Corrosion Resistant Steel Plates in combination with pipes, fittings, and flanges. The material can vary in composition but all the weathering steel types have low carbon, less than 0.3% by weight. This low carbon allows for the ductility and toughness of the Weather Resistant Steels Sheet. The name comes from the ability of the material to withstand weathering or atmospheric conditions over time. The specialty of the Corten Weather Resistant Steels is that it forms an oxide layer on the surface. This oxide layer cannot oxidize any further, so it acts as a barrier between the steels inside the layer and the oxidizing agents to the outside of the plates. Q295 GNHA/B/C/D/E Q355 GNHA/B/C/D/E Q235 NHA/B/C/D/E Q295 NHA/B/C/D/E Q355 NHA/B/C/D/E Q415 NHA/B/C/D/E Q460 NHA/B/C/D/E Q500 NHA/B/C/D/E Q550 NHA/B/C/D/E Q400 NQR1 Q450 NQR1 Q500 NQR1 Q550 NQR1 S235 J0 W/J2W S355 J 0WP S355 J2WP S355 J 0W/J2W/K2W ASTM A242 A588 Gr.A/ Gr.B/ Gr.C/ Gr.K SMA 400AW/BW/CW SMA 490AW/BW/CW SMA 570W | Grade 295-355:5-100mm Grade 415-550:6-60mm |
| Wear-resistant steel plate | Wear-resistant steel plate, also called abrasion-resistant or AR plate, is made from steel billets and comes in many grades. Alloys like carbon, manganese, nickel, chrome, and boron are added in different proportions. The grades, therefore, have different mechanical and chemical properties that will produce different results in an end product. Wear-resistant steel is tougher and harder than conventional steel plate and can last up to 4 times longer than conventional high-strength steel. NM360 , NM400, NM450, NM500 | 6-60mm |
| Mould plate, excellent steel plate | Mould steel plate: P20, SM45, SM48, SM50, SM53, SM55, 2311 Excellent steel plate: 45, 50 | 6-120mm |
Cutting large steel plates as your requirements to make the surface of the plate bright by miling and grinding, also can make holes and make angle degrees,and can weld by your drawing.
For the thickness under 30mm, cutting by laser; For thickness over 30mm, mainly OXY-cut, flame cutting.
For the thickness 200mm steel plate, because during the flame cutting, the temperature is very high, so the cutting parts steel plate might be broken at the angle part, then our workers will repair the angles to be good condition.
For the thickness under 30mm, cutting by laser; For thickness over 30mm, mainly OXY-cut, flame cutting.
For the thickness 200mm steel plate, because during the flame cutting, the temperature is very high, so the cutting parts steel plate might be broken at the angle part, then our workers will repair the angles to be good condition.
About us:
We provide one-stop trading services, including: design, quotation, inspection,packaging, delivery and installation to meet customer needs. We have many excellent experienced personnel. Our technical team combines advanced technology to provide sketch design and efficient project solutions. Our international sales staff can use professional knowledge to solve your problems. Our customers will always be respected because we meet all aspects of your personal needs.The company has always insisted on striving for survival by quality,continuously innovating in management and technology,and has established a sound scientific management and quality assurance system.After 10 years of development and customer support, our carbon steel production capacity is from 500 tons/month to 10000 tons/month. Currently, we have 6 carbon steel production lines. Our professional engineers and well-trained workshop workers help our sales team complete every order ahead of schedule.
Packaging and Shipping:
We offer different modes of transport depending on the customer's destination: rail transport and ship transport,etc.The Shipping Mark shall consist of: Trade mark, Seller's name, Product name, Applicable standards,Specifications, Package No., Contract No., Heat No., Production date, Weighing method, Net weight, Gross Weight, Consignee and Protection symbols, etc.
FAQQ1:Can you send samples?
A:Of course, we can provide customers with free samples and express shipping service to all over of the world.
Q2:What product information do I need to provide?
A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.
Q3:It's my first time to import steel products, can you help me with it?
A:Sure,we have agent to arrange the shipment, we will do it together with you.
Q4:What ports of shipment are there?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.
Q5:What about product prices information?
A:Prices various according to periodic price changes of raw materials.
Q6:What is your terms of payment ?
A:Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment or based on BL copy or LC at sight.
Q7:Do you provide custom made Products service?
A: Yes,if you have your own design , we can produce according to your specification and drawing.
Q8:What are the certifications for your products?
A:We have ISO 9001, MTC, third parties' inspections are all available such SGS, BV ect.
Q9:How long does your delivery time take?
A:In general, our delivery time is within 7-15 days, and may be longer if the quantity is extremely large or special circumstances occur.
Q10: How many countries you already exported to?
A:We have exported to America, Canada, Brazil, Chile, Colombia, Russia, Ukraine, Thailand, Myanmar, Vietnam, India, Kenya, Ghana,somalia and other African countries.Our export experience is rich, we familiar with different market demands, can help customers avoid a lot of trouble.
Q11:Can I go to your factory to visit?
A:Of course, we welcome customers from all over the world to visit our factory.
Q12:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed and customers can appoint third parties to inspect the products before loading too.
Q13:How to pack the products?
A: Standard export sea-worthy packaging, the inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion and various climate changes during ocean transportation.
Q14:What is your working time?
A:In general, our online service time is Beijing time: 8:00-22:00, after 22:00, we will reply to your inquiry in the coming working day.