Product Description
Jiangsu HYT never guarantees our customers can enjoy the lowest price among the industry because that price could be unrealistic in most cases.
Jiangsu HYT only guarantee, here, you can find steel pipes whose quality and quantity is exactly as you want or the most reliable and suitable factory which can produce steel pipes as you wish. You, as well, will enjoy relatively cost-effective solution on the premise that quality and quantity are guaranteed.
HUI YOU TONG stocks A500 cold-formed welded and seamless carbon steel structural tubing in grades A, B, C and D.
Scope
ASTM A500 cold-formed welded and seamless carbon steel round, square, rectangular or special shape structural tubing for construction of bridges, buildings and for structural purposes.
Process
The steel is produced by one or more of the following processes: Open hearth, basic oxygen or electric furnace.
Chemical requirements
| Element | Composition, % | |||
| Grades A, B and D | Grade C | |||
| Heat analysis | Product analysis | Heat analysis | Product analysis | |
| Carbon, maxA | 0.26 | 0.30 | 0.23 | 0.27 |
| Manganese, maxA | 1.35 | 1.40 | 1.35 | 1.40 |
| Phosphorus, max | 0.035 | 0.035 | 0.035 | 0.045 |
| Sulfur, max | 0.035 | 0.045 | 0.035 | 0.045 |
| Copper, minB | 0.20 | 0.18 | 0.20 | 0.18 |
| AFor each reduction of 0.01 percentage point below the specified maximum for carbon, an increase of 0.06 percentage point above the specified maximum for manganese is permitted, up to a maximum of 1.50% by heat analysis and 1.60% by product analysis. BIf copper-containing steel is specified in the purchase order. | ||||
Heat treatment
Only grade D requires heat treatment.
Tensile requirements
| Round structural tubing | ||||
| Grade A | Grade B | Grade C | Grade D | |
| Tensile strength, min, psi (MPa) | 45,000 (310) | 58,000 (400) | 62,000 (425) | 58,000 (400) |
| Yield strength, min, psi, (MPa) | 33,000 (230) | 42,000 (290) | 46,000 (315) | 36,000 (250) |
| Elongation in 2 in. (50 mm), min, %D | 25A | 23B | 21C | 23B |
| Shaped structural tubing | ||||
| Grade A | Grade B | Grade C | Grade D | |
| Tensile strength, min, psi (MPa) | 45,000 (310) | 58,000 (400) | 62,000 (425) | 58,000 (400) |
| Yield strength, min, psi, (MPa) | 39,000 (270) | 46,000 (315) | 50,000 (345) | 36,000 (250) |
| Elongation in 2 in. (50 mm), min, %D | 25A | 23B | 21C | 23B |
| AApplies to specified wall thicknesses (t) equal to or greater than 0.120 in. (3.05 mm). For lighter specified wall thicknesses, the minimum elongation values shall be calculated by the formula: percent elongation in 2 in. (50mm) = 56t + 17.5, rounded to the nearest percent. For A500M use the following formula: 2.2t + 17.5, rounded to the nearest percent. BApplies to specified wall thicknesses (t) equal to or greater than 0.180 in. (4.57 mm). For lighter specified wall thicknesses, the minimum elongation values shall be calculated by the formula: percent elongation in 2 in. (50 mm) = 61t + 12, rounded to the nearest percent. For A500M use the following formula: 2.4t + 12, rounded to the nearest percent. CApplies to specified wall thicknesses (t) equal to or greater than 0.120 in. (3.05 mm). For lighter specified wall thicknesses, the minimum elongation values shall be by agreement with the manufacturer. DThe minimum elongation values specified apply only to tests performed prior to shipment of the tubing. | ||||
Permissible variations in outside diameter
For round structural tubing with outside diameters of 1.900" and smaller: Outside diameter shall not vary more than +/- 5% from specified outside diameter.
For square and rectangular tubing, see the chart below:
| Specified outside large flat dimension, in. (mm) | Permissible variations over and under specified outside flat dimensionsA, in. (mm) |
| 2.5 (65) or under | 0.020 (0.5) |
| Over 2.5 to 3.5 (65 to 90), incl | 0.025 (0.6) |
| Over 3.5 to 5.5 (90 to 140), incl | 0.030 (0.8) |
| Over 5.5 (140) | 0.01 times large flat dimension |
| AThe permissible variations include allowances for convexity and concavity. For rectangular tubing having a ratio of outside large to small flat dimension less than 1.5, and for square tubing, the permissible variations in small flat dimension shall be identical to the permissible variations in large flat dimension. For rectangular tubing having a ratio of outside large to small flat dimension in the range of 1.5 to 3.0 inclusive, the permissible variations in small flat dimension shall be 1.5 times the permissible variations in large flat dimension. For rectangular tubing having a ratio of outside large to small flat dimension greater than 3.0, the permissive variations in small flat dimension shall be 2.0 times the permissible variations in large flat dimension. | |
Steel Pipe Package and Delivery Details
Port | Shanghai, Tianjin, Qingdao |
Package | (a) tubes bound with a steel band, (b) tubes wrapped in plastic sheets, burlap, (c) tubes in wooden crates. (or as customers' demands) |
Marking | (a) without marking, (b) marked with colored stripes on the tubes (tube bundles), (c) marked with spray either by a white or black color using Inkjet (d) marked by stamping the data (this applies to OD > 22 mm and WT >2.3 mm). |
Surface Protection | Inter paper available PVC protecting film available Tip: While ordering, it is necessary to agree upon the methods and means of temporarily protecting the surface of the tubes during transportation and storage. |
Container Size | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM |
Jiangsu HYT, founded in 2015, is a wholly-owned subsidiary of WuxiLusheng Special Steel Co, Ltd which is responsible for overseassales and market exploitation of various kinds of steel pipes.
Our Group, certified by ISO and SGS, is a high-tech enterprise integrating research, development, production and sales of steel pipesmade of stainless steel, carbon steel and alloy steel. HYT owns independent steel pipe factories with 50+ high precision cold drawingand cold rolling production lines, which can meet customers' requirements on the quality, quantity, precision and customization of steel pipes.
Only a Widely Recognized Company can be Trusted by Our Customers
HYT always believes that various certifications can prove the strength and reliability of a company more than words. HYT actively accepts qualification audits from various official or industry organizations to relieve customers from worries. We believe these will help us serve our customers better.
Since 2015, HYT has actively cooperated with many domestic steel mills. HYT regularly exchange steel technology with these mills and make progress from this. ln the process of communicating with customers, we carefully listen to customers' requirements and produce steel products as customers' demands. Under necessary circumstances, HYT is willing to help customers find suitable steel mill to produce some special products to save time and cost for customers because we have the reliable resources of still mills to prevent you to be cheated.
Obtaining Customers' Trust is Our Focus
Our Group provides customers with high-quality products and services with advanced equipment, strong technical strength and a high sense of social responsibility. Since 2015, Our products have been exported globally, including Germany, France, the United States, Japan, Russia, ltaly, Turkey, the United Arab Emirates, Australia, Saudi Arabia, Ukraine, Thailand, Viet-nam, Singapore, Spain, lreland, India, South Africa, Mexico, etc.
We sincerely hope to establish a long-term and extensive strategic partnership with ourcustomers for mutual benefit and common development!
Old Customers' Feedback is HYT Precious Treasure
We also properly save some past conversation screenshot(Customers' names are coded toprotect privacy) to record the feedback of our old customers when they have used HYT steel pipe. HYT pays more attention to customers' feedback because we trust only in this way can we know the pain spot of steel pipe industry and better serve our customers.
FAQ
Accepted Payment Terms: T/T, L/C, D/P, etc.
Yes, we can produce customized products exactly as your specification and CAD drawing.